Changing to 5 Ghz in Setek WiFi Extender
October 30, 2024 / Stephen Nathan

Changing to 5 Ghz in Setek WiFi Extender

The Setek extender is one of the network boosters that connects with your router and extends its network. You can complete the Setek WiFi extender setup via WPS as well as Ethernet. The extender comes with pre-set Wireless settings, which mostly works as user demands.

But if user wants to change the wireless settings, then it can be done from the web GUI interface. So, have a look at simple instructions to change to 5 GHz in Setek WiFi extender.

Access Setek Extender Interface

To access the interface you have to use the computer or laptop which should be connected to the Setek network. After doing that follow some steps below here;

  • Open an updated web browser and type in the IP address 192.168.10.1 in the search bar.
  • Start the search by pressing the Enter button, you will reach to the interface login page.
  • To access the interface, you have to type in the extender admin credentials (username and password) here.
  • Enter the credentials and get in to the interface dashboard.

Change 2.4 GHz to 5 GHz Channel

To change the Setek WiFi extender Wireless settings, you have to the follow these below written steps;

  • After accessing the interface, you have to click on the Advanced settings.
  • Here, find the Wireless Settings and Network option and open it.
  • In it, select the Frequency Channels option, where you can change the band channel.
  • If it is 2.4 GHz band then you can change it to the 5 GHz and if it is 5 Ghz then you can change it to the 2.4 GHz.

Only changing the frequency channels can’t help you to make the extender boost the WiFi signals, you must also use some more tips. We will guide you through them;

Some More Tips to Boost Signals

Here in this extra section you will get to know about how you can boost the WiFi signals which also includes change to 5 Ghz in Setek WiFi extender.

  • Change location to optimal location.
  • Make sure router is getting internet signal.
  • Use more extenders to the boost more signals.
  • Change frequency channels according to the area.
  • Troubleshooting any error of blinking light or red light will also help.

The Final Words

So, here, we end this informative blog, where you have learned about how to change to 5 Ghz in Setek WiFi extender with the help of interface.

Tags: