How to Connect Setek WiFi Extender to Starlink Router 
Are you looking for instructions to add a Setek WiFi range extender to the home network created by a Starlink router? This blog can help you out. Here, you will get to know about detailed instructions on how to connect Setek WiFi extender to Starlink router.
This is to inform you that connecting the range extender to the WiFi router means performing the setup process. Therefore, if your Setek WiFi extender is already amplifying the internet signals emitted by some other router, you are required to perform a factory default reset first. Once done, you can refer to the instructions mentioned in the upcoming sections.
How to Connect Setek WiFi Extender to Starlink Router?
1. Power Cycle and Connect Your Devices
Before you start the setup process, power cycle your Starlink router and the Setek WiFi extender (if it is an existing networking device). You are suggested to make your devices rest for at least 10 minutes. Meanwhile, grab an Ethernet cable and use it to create a LAN cable connection between your devices. Just in case you are now familiar with which ports to utilize, kindly refer to the product manual.
After that, power up your router first. When the Power lamp on your Starlink router becomes stable, you are suggested to power up the extender. In case the Setek WiFi extender blinking light situation shows up, you should check the power socket and use another one if the current one is found damaged.
Your knowledge about how to connect Setek WiFi extender to the Starlink router might go waste if you keep both devices at any random location during the process. The reason being, there are numerous factors present in the house that tend to affect the signal propagation process. Therefore, always make sure that your WiFi devices are placed away from home appliances that work on the principle of electromagnetic induction. Apart from this, do not keep your Setek extender and Starlink router near reflexive surfaces, metal objects, or objects that contain a lot of water.
2. Connect the Client Device to the Extender
Once the connection between your devices becomes successful and you’re done powering them up, bring in a laptop in the game. In case you do not have one, the PC will help you out. A mobile phone can also help you complete the final stage of the process. No matter which device you opt for, you are supposed to connect it to the Setek extender’s network.
You can locate the default SSID and WiFi password of the extender on its label. Just in case you are not able to track these details from the label, use the product’s manual. Otherwise, go with a wired connection between the extender and the computer. Make sure to use an intact cable.
The IP address is a set of digits separated by periods that help you access the web-based management panel of the networking device and access its settings to make various changes. Every networking device including the Starlink router and the Setek extender has a default IP address. You can take the help of the user manual to know the correct values. FYI, the default IP of your extender will play a great role in finalizing the connection process. However, you might need to access the Starlink router dashboard and check the IP of your extender if the default IP fails to work. This is because, in 90% of cases, the router assigns a new IP address to the range extender.
3. Access the Setek Extender IP Address
The last and final step that you need to take while learning how to connect Setek WiFi extender to the Starlink router is the assessment of the IP address. Therefore, first, try using the default IP address. For this, input the default value into the browser’s address bar. You can pick any browser but make sure to go with an updated one. You will soon cross paths with the administrative portal of your Setek extender.
On the off-chance, you are not able to reach the extender’s login portal, consider accessing the IP assigned to your extender by the Starlink router. Complete the login process using the default password and username of your Setek extender. You will then see a few instructions appearing on the screen. Out of which, one will prompt you to select the network to be extended. Choose the one that belongs to your Starlink router. Save the changes and tweak other settings. The setup process of your Setek extender along with its connection with the router is completed. You are now free to take the extender to a new location.
The Concluding Thought
Our guide titled “How to connect Setek WiFi extender to Starlink router” ends here. As we said at the beginning the process is all about performing Setek WiFi extender setup, we hope that you will excel at it. Now, all you have to do is join your client devices to the newly extended network and enjoy uninterrupted WiFi connectivity.