How to Setup Setek Extender with Motorola Router?

Setek extender can easily be configured and connected to any router network via WPS (wirelessly). Here, you will get to gather the knowledge of how to complete the Setek WiFi extender setup with Motorola router easily.

Connect Setek Extender to Motorola Router

There are two ways that you can easily connect the extender to the Motorola router in your home.

WPS method (most used)

• Plug the extender in to the power outlet and turn it on.
• Then, turn on the Motorola router connected to your modem or ISP server.
• Press the WPS button on the WiFi router first.
• Within two minutes press the WiFi extender WPS button.

Ethernet Cable

• Place the extender near to the router.
• Plug the Ethernet cable end to the router LAN port.
• Connect the other end to the extender and turn them on.

Now, you are ready to configure the extender via computer.

Configure Extender via Computer

• Connect the computer/laptop to the extender network via LAN cable or SSID.
• You have to search the IP address that is 192.168.10.1 in the web browser to reach the login page of interface.
• On this login page, you have to enter the username and password, which you can find on the label or in the user manual of extender.
• Just enter the credentials and access interface, where you can manage or configure the Setek WiFi extender.

Troubleshooting Tips

Plug Extender Away From Electronic Devices

Also make sure that the extender is plugged and powered on at different location far away from the electronic devices like microwave ovens. So, while setting up your Setek device choose any optimal location in your house.

Make sure extender not out of reach

You must plug the WiFi extender near to or within the reach of the home router in your house. Make sure the power outlet/wall socket is not damaged, if it is then fix it or use another one.

Reboot Setek Extender

After applying all the troubleshooting tips and not finding any solution, in this case, you can reboot the extender.

• Method one is pressing the power button twice to reboot.
• Method two is plugging out the device from socket and plugging it in again to turn it on.

Reset Extender Device

The factory reset process used when all the solutions are failed to fix the problem. The reset process will clear out all the data from the device and after that, you have to configure the device again via computer.

• Press and hold the reset pinhole button about 5-10 seconds.
• You have to use the Sharp object to hold.
• Just release it and reset process will start.

In Final Thoughts

Hope you have learned how to connect Setek extender to Motorola router and how to configure it. We have also provided some troubleshooting tips to solve any issue.