Struggling With Setek Repeater No Internet Issue? Let’s Fix!
WiFi repeaters are boons for those who want to access a lag-free internet connection throughout their houses. Due to this very reason, you can see numerous people installing a variety of WiFi repeaters. Setek repeaters are among those brands that are leading the race to help people boost WiFi signals. But, the situation is quite disappointing when the Setek repeater no internet issue shows up even after installing the repeater.
This blog will entirely focus on the techniques to follow to connect a Setek repeater back to the internet again. You can take advantage of these tips if you are also facing the same problem. Read on.
Why Are You Facing Setek Repeater No Internet Issue?
Users face the no internet connection problem with their WiFi repeaters when the repeater is not connected to the router. Now, the question arises what is the source of connection between your networking hardware? Is it an Ethernet cable? Or have you taken the aid of the WPS method to connect the repeater to the router? Whatever the case is, the pointers given below will help you address the connectivity issue between both devices.
Ethernet Cable: If you have connected the router and repeater with the help of an Ethernet cable, you are suggested to check its physical condition. It must not be damaged in any case. Aside from this, you should have established a finger-tight connection between both devices.
WPS Connection: Just in case you have connected the router and repeater using the WPS mode, you are suggested to verify that both devices are placed in close proximity. Placing them too far won’t let them communicate properly. And, yes the Setek repeater no internet issue can also trouble you if your devices are placed too close.
After performing a necessary workaround on the router and repeater connection, check whether the internet connection is back or not. In case, it does not, try your hands on the troubleshooting techniques given in the upcoming section.
Quick Tip
Try pinging your WiFi router. If you succeed it means the connection problem has arisen from the repeater’s end. In case you don’t, it means the internet problem is from the ISP’s end. Thus, you should talk to him immediately to fix the issue.
Troubleshooting: Setek Repeater No Internet Issue
1. Restart the Extender
Your extender/repeater won’t provide you with an internet connection on the connected devices if technical glitches have overtaken its ability to perform effectively. Know that these glitches are also the responsible factor behind the Setek extender password not working issue. Thus, you are suggested to restart the repeater right away. The process does not require you to get hold of a degree. All you have to do is follow some basic steps highlighted below:
- Power Down: Locate the POWER button on the repeater and press it.
- Unplug: Now, unplug your repeater from its respective power outlet.
- Wait: Let your Setek repeater rest for 20 minutes.
- Re-plug: After waiting for the required amount of time, replug the repeater.
- Power Up: Press the POWER button to turn on the repeater.
2. Get Rid of Network Interference
There is a possibility that your repeater is not getting connected to the internet because of too much network interference. FYI, network interference stands for the interruptions in the WiFi signal propagation. These interruptions can be a blockage or a deviation. Therefore, you are suggested to either relocate your Setek repeater or remove a few things from its surroundings. Whatever you do, make sure that your repeater stays is not kept near these factors.
- Heavy Electrical Appliances: televisions, refrigerators, microwave ovens, etc.
- Bluetooth Devices: speakers, watches, and similar gadgets.
- Tracking Devices: baby monitors, GPS-operated devices.
- Water Carrying Objects: aquariums, geysers, reverse osmosis, etc.
- Reflexive Surfaces: Mirrors and objects with metal polishing.
Try This!
The no internet issue can also be an outcome of the heavy network traffic on your WiFi repeater. Thus, all you are suggested to do is disconnect a couple of devices from the repeater’s WiFi. Once done, check if the internet connection comes back.
The Final Words
The Setek repeater no internet issue can be an outcome of plenty of reasons. We’ve listed the topmost of them in this post. Apart from the weak repeater-router connection, technical glitches, and WiFi interference, improper setup of the repeater can also be the reason behind the issue.
To fix the problem forever, you are suggested to perform a factory default reset on the repeater. For this, you need to press the RESET button on the repeater. The button is generally present inside a hole with the same label. You have to keep the button pressed with the help of a sharp object for 10-15 seconds. As soon as you release the button, the repeater will reset and you can configure it once again.
To set up the repeater, you need to access its default IP address on a device connected to its WiFi network and follow the on-screen prompts.
