8 Steps to Connect Setek Extender to Linksys EA8300 AC2200

The Setek WiFi extender is a best choice, if your router does not provide internet signals to some corners of your house. The Setek extender boosts the WiFi signals to those areas where you face slow internet.
In today’s blog, we will explain how to connect Setek extender to the Linksys EA8300 AC2200 router with easy steps. Don’t miss any step to optimize your home network. Let’s start:

What You’ll Need

First of all, see that things which you need to complete a Setek wifi extender setup.
• Your Setek WiFi extender
• The Linksys EA8300 AC2200 router
• A phone, tablet, or computer
• Your router’s WiFi network name and password

Step 1: Plug in the Setek Extender

Find a wall outlet close to your Linksys router and plug in the Setek extender. After plugging, a light will start blinking on the extender, wait till this light turn to solid. It will take something 30 seconds. During setup, it’s important to keep the extender near the router.

Step 2: Connect to the Extender

On your device (laptop, phone, etc.), go to the WiFi settings. You should see a network named something like Setek_EXT
Tap to connect. You won’t have internet yet—this is just to access the setup interface.

Step 3: Open the Setup Page

Now, launch the updated web browser on your computer. Steps to access the setup page:
• Connect to the Setek_EXT network of the extender.
• Type the into the address bar: 192.168.10.1.
• Click on the enter button and go to login button.

Step 4: Log In to the Extender

When you come to the login page, it will ask for login credentials. The default login is usually:
• Username: admin
• Password: admin
Type those in and log in. If that doesn’t work, check your extender’s user manual for the correct login details.

Step 5: Select Your Router’s Network

Once logged in, the extender will scan for available WiFi networks. From the list, find your Linksys EA8300 network. Click on it.
Then, it will ask you for the WiFi password. Fill in the password you use to log in to your Linksys router. After that, press the Next button on the screen.

Step 6: Create Your Extended Network

You can now name the extended network. You can keep the default (like YourNetwork_EXT) or create your own name. Use something that helps you identify it as the extended signal.
Press on Finish or Apply to complete the setup.

Step 7: Test the Connection

Go to your device, connect to the new network you just created of Setek extender.
Try opening a few websites to make sure you have internet access. If the pages load quickly, the extender is working correctly.

Step 8: Move the Extender to a Better Spot

When you complete all the above given steps, your Setek wifi extender setup is complete. Now unplug the extender and plug it to the place where you faces slow internet. Also, remember do not place the extender outside the range of router.

Troubleshooting Tips

If something doesn’t go right, try these:
• No login page? To solve this, check that you are connected to the Setek network properly.
• Wrong password? Ensure that you are using the correct password.
• Still no internet? Restart both the router and the extender. Try the setup again.
• Weak signal? Relocate the extender further to the router, but not so close.

Final Thoughts

If you follow all the above steps properly, then you can easily connect your Setek extender to the Linksys EA8300 AC2200 router. This kind of setup works well for homes of all sizes. Just remember to place the extender in a spot where it can still receive a strong signal from your router.

With this simple guide, your Setek WiFi extender setup should be complete and working without issues. Enjoy the stronger connection and fewer dropouts.

FAQs