
March 22, 2025 / Stephen Nathan
How to Connect Setek Extender to Linksys Ea7300 Max Router?
The Linksys Ea7300 Max router is an advanced router that provides high-speed internet, especially for streaming and gaming. But if you are living in a large home and this router cannot offer signals to every corner of the house. Here you need to use a WiFi range extender like Setek extender. The work of the extender is to boost the existing router’s signals and provide them to low network areas.
If you don’t know how perform Setek WiFi extender setup, then here you can learn how to connect the Setek extender to the Linksys Ea7300 Max router.
Wired Connection
Position the Extender: Setek extenders should be positioned between the router and the area with a weak WiFi signal. Confirm that it is situated within the range of the router’s signal.
Power on the Extender: Insert the Setek extender into a plug socket and ensure that the LED indicators flash when it is powered on.
Connect to the Extender: Use your computer or mobile device to scan for wireless connections, make sure to connect to the SSID of the Setek extender.
Access the Setup Page: Open any updated web browser, and type IP address
192.168.10.1 into the address bar. It will redirect you to the login page.
Login: Type in the default username and password mentioned on the label of the Setek WiFi extender
Select Your Router: On the setup screen, Choose Linksys Ea7300 Max router network name from the list and enter the WiFi password to connect.
Finalize Setup: Complete the remaining process by following the instructions provided on the screen, ensure both router and extender are restarted so that the connection is stable.
Wireless Connection(WPS Button)
Placement – Place the extender close to the Linksys router, and plug it into the power socket.
2. Press WPS Button – First press the WPS button of the router and within two minutes press the WPS button of the extender.
3. Ensure Light Status – When you press the button, a light starts blinking on both devices, here wait till the light becomes to solid.
4. Move the Extender – Once the light turns solid, move the extender to that area, where you can face slow internet.
This way you can connect the Setek extender to Linksys router ea7300 router at home.
Conclusion
In the above blog, you learn how to connect the Setek extender to the Linksys router ea7300 router. Above we provide two methods wireless and wired connection; you can use any one according to your situation.