How to Connect Setek Extender to Virgin Media Router?

Want to extend your home WiFi network, simply use the Setek WiFi extender. Here, you will get to know how to connect the Setek extender to Virgin media router with the help of simple instructions.

We will also provide answers to how to configure the extender and how to troubleshooting technical issues during setup.

Connect Extender to Hub Physically

There are two different easy methods to connect the Setek WiFi extender with the Virgin media router; one is majorly used WPS method and other is with the Ethernet cable.

WPS Method

Making the connection without using any cable through the WPS method is pretty easy. Just follow some steps;

• Plug in the extender to the electric wall socket.
• Supply the power and press the power button.
• Press the router WPS button first.
• Then, within two minutes, you have to press WPS button on extender.

Ethernet Cable

Trying to connect the Setek extender to the Virgin router with the Ethernet cable, then use these below given instructions;

• Place the extender near to router and use the cable.
• Connect one end to the router LAN port and other to extender port.
• Then simply, supply power to the extender by plugging it in to wall socket.

Check Virgin Media Hub Configuration

Before going for the configuration of the Setek WiFi extender, you must check that the Virgin router is fully adjusted or configured. Learn how to do it;

• Connect the computer to the router network.
• Go to the web browser and search IP address 192.168.1.1 or 192.168.0.1.
• You will get to the login page, here just enter the username and password.
• Reach to the interface dashboard and recheck all the settings like frequency and enabled features.

Now, by confirming all the settings, you can carry on to setup the Setek extender in your home. up next you will get to learn how to configure the extender.

Configure Setek WiFi Extender

You have to make the sure that the extender is receiving the internet signals from the router and then connect laptop or computer;

• Use the LAN cable to connect the internet device.
• Choose the updated web browser and enter the IP address 192.168.10.1.
• The Setek login interface window will open up, where you have to enter admin credentials.
• You will find the credentials like username and password in the user manual and on the extender label.

• Log In to the interface window by using admin credentials, here you can adjust and manage the settings, access and enable features.

Take a look at some troubleshooting tips to the make the setup or connection error free and secure.

Troubleshooting Tips

Reboot Extender

Find the power button of the extender and press it twice to restart the device or unplug the extender device and plug it again to the wall socket.

Reset Extender

To reset thee extender, you have to long press the REEST pinhole button under the device with the help of the pin or pen.

The End Lines

Here, you have learned about how to connect the Setek WiFi extender with the Virgin media hub router. We have also added configuration process and troubleshooting tips.