Setek WiFi Extender Power Light Blinking then Turns Off [Fix]
The front panel of a Setek WiFi range extender has 3 lights. The first one is called the Power light. If we talk about the second LED, it is dedicated to the Ethernet link, whereas the third one reveals the status of WiFi connection that the Setek extender delivers. All these lights serve their purpose according to their names.
But, these days, a dramatic increase of the complaints regarding the extender’s power light has increased. Some Setek users state that their WiFi extender power light keeps blinking then turns off. Well, that is not a good sign however. The Power lamp/light of a Setek extender must be stable.
What might have caused the LED light to blink and then turn off, we are going to discuss it right away. If you have also done Setek WiFi extender setup in your house and are facing a similar kind of problem, you are suggested to take a walk through the blog to troubleshoot the issue.
Why is Setek Extender Power Light Blinking then Turns Off?
The most possible reason why the Power lamp of your Setek range extender keeps blinking is the supply of insufficient power. This usually happens when:
- The extender is connected to a damaged socket.
- There are random power outages in your area.
- Your extender is stuck in a boot loop.
- The extender is not plugged properly into the wall socket.
Therefore, to fix the issue, we recommend you check out the next section and learn what you can do from your end.
Solution: Setek WiFi Extender Keeps Blinking then Turns Off
1. Get the Damaged Socket Repaired
Start the troubleshooting process by checking the wall outlet into which you have plugged your Setek range extender. Just in case it needs repairing, get the task done by calling up an electrician.
You also have the option of plugging in your Setek extender into another wall outlet. Just make sure that you choose the one that lies within the range of signals emitted by your host router.
2. Use a UPS to Compensate Power Outages
Power outages are random and electrical gadgets suffer a lot in an area, where power outages are regular. Therefore, there is a high possibility that a power outage has caused the problem you are facing. To compensate for power outages, we suggest you take the help of a UPS. Not only the power outages, but it will regulate the amount of electricity being supplied to the extender in the case of power surges too.
3. Restart the Extender
There is a possibility that the extender is stuck in a boot loop due to which its Power light keeps blinking and is not turning solid. One of the best solutions that we recommend you follow in such a case is to reboot the extender. It will also resolve technical glitches that might be bugging the extender.
To reboot the extender, you just need to plug it out of its socket, wait for a time period of 15-20 minutes, and connect it back. The best thing about this technique is that you can use it no matter whether you performed Setek SE-01 setup or have installed another model of Setek extender.
4. Plug the Extender Properly
Although this is a very obvious thing, still there are chances that you were in a hurry while plugging your range extender into its respective socket. Thus, without any delay, check for the loose connection. If the extender isn’t plugged in properly, you are suggested to connect it properly.
Quick Tip: Heavy network traffic on your range extender can also be the reason why the Setek WiFi extender power light keeps blinking then turns off. Therefore, you are suggested to disconnect a few devices from the WiFi network of your Setek range extender and see if the Power light stabilizes.
Still Setek WiFi Extender Power Light Blinking then Turns Off?
On the off-chance, the Power light on your WiFi extender keeps blinking and then turns off, it is a sign that extender has fallen a victim to some serious problem. Therefore, it is recommended that you reset the Setek extender so that you can reconfigure and start everything from scratch.
For resetting the extender, pay attention to the following instructions:
- Ensure that your extender is powered up.
- Look for the Reset button.
- Using a sharp object, press and hold the button very carefully.
- Your Setek extender will start working on the default settings.
In Conclusion
That’s all about what to do if your Setek WiFi extender power light keeps blinking and then turns off. Hopefully, after the reset process, the problem will get resolved. But, do not forget that you are now left with the task of setting up the extender again. Do this with the help of the extender’s default username “admin”, password “admin”, and SSID “SETEK”.
