How to Connect Setek Extender to Asus Router?

The extenders are the signal booster as well as boost the coverage. One of the devices is Setek WiFi extender. Here, we will discuss the connection between the Setek WiFi extender and Asus router with the help of the simple instructions.

We will start the blog with checking the router configuration, then connect extender to the router physically. At last provides how to complete the Setek WiFi extender setup by configuring it.

Check Router Configuration

To check that the Asus router is fully configured, you have to access the router interface with your computer, let’s see how to do it;

• Connect the computer or laptop to the router network via SSID details or LAN cable.
• Now, you must open the web browser which should be updated in your computer.
• Type the router IP address http://192.168.1.1 in address bar and search.
• The search will take you to the login interface page, here you have to enter the username and password to move further.
• Now, you will access the interface window, where just check that you have adjusted all settings and networks.

After confirming the configuration and adjusted settings, you must begin the setup of the Setek WiFi range extender;

Connect Router to Extender Physically

You have to use the Ethernet cable to connect the router to the home modem;

• Connect one end of the Asus router WAN port and other to the modem LAN port.
• Then turn the devices on by inserting their power cord to the wall socket.

To connect the extender with the router, then you can connect them by following some of the instructions given below;

• Connect the Setek extender to the power outlet directly.
• Then press the WPS button on the router and press the same button on the extender within two minutes.

There is another way to connect the Setek extender to the router via cable;

• You must link the router LAN port with the Extender Ethernet port with the help of the Ethernet cable.
• Then, start the extender network by turning it on by plugging it in the electric wall socket.

Now, let’s configure the extender to complete the configuration;

Configure Setek WiFi Extender

• Connect the computer or laptop to the extender network via SSID details or LAN cable.
• Now, you must open the web browser which should be updated in your computer.
• Type the extender IP address 192.168.10.1 in address bar and search.

• The search will take you to the login interface page, here you have to enter the username and password to move further.
• Now, you will access the interface window, where just check that you have adjusted all settings and networks.

Conclusion

Here, you have find the instructions to connect the Setek WiFi extender to Asus router.