How to connect Setek Extender to Deco Mesh Router?

If you have a Deco mesh router and want to connect the Setek extender to it. This blog teach you how to connect Setek extender to deco mesh router. It is not difficult to perform the Setek WiFi extender setup with any router. You can do it by following some easy steps:

Steps to Setup Setek Extender

You can setup the Setek WiFi extender via two easy methods. Here we discuss about both the methods in detail. Read and follow every step carefully. Methods are:

1. Wireless Connection (WPS Button)
2. Wired Connection (Web Interface)

Wireless Connection (WPS Button)

If your router has a WPS button, then we suggest you to use the WPS button to connect Setek extender to Deco mesh router. Follow the steps given below to us this method:

• Temporary place the extender near to the router.
• Plug the extender directly to the power socket.
• Then search and press the WPS button of the Deco mesh router first.
• After few seconds push on the WPS button of the Setek extender.
• A light is start blink on the extender.
• Wait till the light turn to solid color light.
• Move the extender to a dead zone area.

When the light become solid means the setup of the extender is complete. After this method, it’s your choice to configure the extender or not, because extender inherit all the default settings of the router.

Wired Connection (Web Interface)

Many times a router does not support WPS button, in this condition you need to use the wired connection to connect Setek extender to deco mesh router. Steps are:

• Place the extender where the signal does not reach.
• Take an Ethernet cable and make a connection between router and extender.
• Power the extender by plugging it directly to power socket.

After that, configure the Setek extender by using the Web Interface.

• Attach the computer device to the default network of the Setek extender.
• Then go to web browser on the computer.
• And type IP address 192.168.10.1 on address bar.
• Login the interface by using default login detail.
• When you enter the dashboard of web interface.
• Select the network name and fill its password which you want to extend.

This way you can connect Setek extender to Deco mesh router via Web interface.

Conclusion

In the above blog, you learned how to connect Setek extender to Deco mesh router at home by using simple methods.