How to connect Setek Extender with MERCUSYS Router?

You are a user of MERCUSYS router, and want to connect Setek extender to it, but you don’t know whether the Setek Extender will be work with MERCUSYS router or not and how it will be connected.

Yes, Setek extender can be work with MERCUSYS router, and if you want to connect, then read this blog to connect Setek WiFi extender setup with MERCUSYS router. Let’s start

Physical Setup

Before configuring the Setek extender, you need to physically set up the extender. Anyway, it is very easy to set up. But it also has proper steps, which you should use.

• Open the box; you found an extender inside the box.
• Put it out and keep it close to the MERCUSYS router.
• Take an Ethernet cable and use it to connect extender to MERCUSYS router.
• Then plug the extender into the power socket directly.

Make sure if you are using the WPS method, then you don’t need to use the Ethernet cable to connect the Setek extender with the MERCUSYS router.

Setek Connect Via WPS Button

• You have seen the WPS button on both the router and extender.
• First hit the WPS button of the MERCUSYS Router.
• Then after a few seconds, push the button of the Setek extender.
• A light is blinking both on the router and the extender.
• When it turns into stable, it means the connection process is complete.

It is the easy method to connect the Setek extender with the MERCUSYS router. In this method, the extender inherits all the custom settings of the MERCUSYS router.

Configure Via Computer

If your router does not have a WPS button, you need an Ethernet cable to connect. Here we discuss step by step how to use a computer to connect the Setek extender with the MERCUSYS router.

• First of all, make a connection between the computer and the extender with an Ethernet cable.
• Go to any web browser and type IP address 192.168.10.1 into the search bar.
• A login window will appear; check the label and user manual for the default login credential.
• When you come to the web dashboard, and then select the option WiFi Range Extender.
• Select the network and enter the password that you want to boost.

This way you can configure your Setek extender with MERCUSYS router easily. On this dashboard, you will set the separate SSID and password for the extender.

Conclusion

Hope you follow all the above steps properly and carefully. This helps you to connect Setek extender with the MERCUSYS router at home.