How to Connect Your Setek Extender with Arris Router?

Extender connects to the router and extends its network coverage in your house; it can connect to the router through WPS as well as cable. We will provide how you can connect Setek extender to the Arris router and how to configure it using Setek WiFi extender login interface. We will also provide troubleshooting tips and solutions to solve any technical issue.

Connect Setek Extender to Arris Router (WPS Method)

You have to first connect the Setek extender to the router physically;

• You can connect extender via WPS method without using cable.
• Just plug the extender in to a power socket/outlet and turn it on.
• Now, press the WPS button the router.
• Then, press same button on extender within 2 minutes.

Both the devices will connect automatically with each other. Then, start the configuration process with the help of below instructions;

Configure or Adjust Setek Extender Settings

Configure and adjust the Setek WiFi extender setting and networks through computer/laptop;

• To adjust the settings of the extender through the computer or laptop, you have to connect it to extender network.
• Then, open or launch an updated web browser and type the IP address 192.168.10.1, press Enter to search.
• You will reach to the interface login page, where you have to enter the username and password.
• If you don’t have admin credentials, find them in the label or user manual of the WiFi extender.
• Access the interface window, where you can configure all the settings and networks of the device.

Now, have a look at some of tips or solutions, which will help you if you face any problem while setting up your Setek extender device.

Troubleshooting Tips and Solutions

Ensure Extender is on Optimal Location

Make sure you have chosen optimal location to plug the Setek extender in wall socket. The optimal location is far away from the microwave ovens or microphones.

Use Cable Link If WPS not Working

In some situations, WPS connection method won’t work, to connect you can use the Ethernet cable to connect extender to the router.

Reboot Setek Device

There are two methods that you can use to restart the Setek WiFi extender given below;

Reset If Issue Not Fix

If restarting the Extender is not solving the problem, then you can perform extender reset process;

• Find the reset pinhole button on the Device back.
• Use sharp object or pin to press and hold the button for 10-15 minutes.
• After that, that reset process will start.

End Conclusion

Here, you have seen and learned how to connect the Setek extender to the Arris router, and how to configure it so that you can connect to its network.