April 2, 2025 / Stephen Nathan
How to Setup Setek WiFi Extender with Nighthawk RAX10 Dual-Band Router?
Setek WiFi extender helps to boost your home network and provides reliable internet signals at every corner of your house. You can connect the Setek WiFi extender to any router. But before using the device, you need to setup the Setek extender. This article provides you complete instructions explaining Sete WiFi Extender setup with Nighthawk RAX10 Dual-Band Router. Please note that Setek extender setup is consistent, regardless of the router used. Follow below steps carefully:
Steps for Setek Extender WiFi Extender Setup
Unboxing the Extender
First of all, open the box. You will find a Setek extender inside the box; it looks like an adapter. You can simply plug it, but follow the process step by step.
Place and Connect
Place the extender close to the router and connect with the help of the Ethernet cable to the router. Ensure that the router and modem are turned off during the connection. After making an Ethernet connection, plug in the extender to the power socket. Then turn on the extender, router, and modem
Configure Via Web Interface
After completing physical Setek Wifi Extender setup, you need to configure the router via computer. This method is also known as manual setup. To complete the configure process, follow the steps given below:
Firstly, attach your computer or mobile device to the network of the Setek extender.
There is no password needed to connect. (You can also use the Ethernet cable)
Go to the web browser and type the IP address 192.168.10.1 into the address bar.
Here, you will see the login page, enter the default login detail to login.
After logging in, you will see the web interface of the Setek extender.
Now select the network of the router that you want to extend.
Put the password of the router and click on the connect button.
After following these steps, you can easily setup the Setek wifi extender with Nighthawk RAX10 Dual-Band Router. You can adjust the settings of the extender on this web interface, such as updating the firmware, seeing the list of devices that connected to the extender, and changing the wifi channels.
Note: See the default login credentials on the label on the Setek Extender.
Configure via WPS Button
This is the easiest method and recommended method to configure the extender to the Nighthawk RAX10 Dual-Band Router. If your router has a WPS button, then use this method. The steps to use are:
First, ensure that you place the extender within the range of the router.
Turn on the extender by plugging it into the power socket directly.
Now press the WPS button of the router first.
Within two minutes press the WPS button of the extender.
You notice a light will start blinking on the extender.
When this light turns to a solid color, means your extender is connected successfully.
When you are using this method, it is your choice to configure your extender to the router or not. Because the extender inherits all the custom settings of the router.
Troubleshooting Tips
If you are facing issues during Setek WiFi Extender login or login
process, then there are many reasons behind these issues. You need to follow some tips for a successful Setek wifi extender Setup.
Facing Issue while Installation
If there are issues during the installation process, follow the steps given below to solve them.
Check the power cables are properly connected to the power socket.
Connect the Ethernet cable correctly on both the router and extender sides.
Ensure that there is not any damage to any cable.
Make sure that the router and the extender are getting the proper power supply.
Ensure that all the power and network cable connections are in good condition.
Unable to Login
Many times, users are able to install the Setek extender but faces problems while login. This may happen due to many reasons; try to troubleshoot using below tips:
Make sure you are using the correct version of the web browser.
Clear all cookies and cache of the browser.
Temporarily disable firewall and proxy software. Sometimes they create issues while logging in.
If you are not able to log in with one browser, then use a different web browser.
Ensure that your device is connected to the network of the Setek extender.
Use the correct IP address to access the interface, and use the correct credential to login.
Above tips will help you to smoothly setup the Setek WiFi extender with Nighthawk RAX10 Dual-Band Router.
Conclusion
In the year 2025, this is the latest guide for you to combat setup errors related to Setek WiFi extender and setup the device easily. If you are experiencing any issues with your WiFi extender or router, please don’t hesitate to give us a call. Our technical support team is here to help you ensure you get the best performance from your Setek devices.
FAQs
Can I use Setek Extender with any router?
Yes, you can use the Setek extender with any router. Follow the same configuration process to setup the device regardless of router’s brand.
Can I access the web interface of the Setek extender on any device?
Yes, you can access the web interface of the Setek WiFi extender on any device like mobile, tablet, or laptop.
How to Reset Setek WiFi Extender?
To reset, please find and press the reset button for a few seconds and wait till the extender boots up.
-
I am Setphen Nathan, a passionate technical writer with over 12 years of experience. My key domain areas include cable modems, routers and extenders. I have hands on experience in installing the networking devices, hence I have technical knowledge to write easy tutorials and clear how-to-setup guides. Setek WiFi Extenders are one of the best extenders available in the market, and promise awesome WiFi speed. You can go through my Setek Guides to easily configure the device and troubleshoot connectivity errors.
View all posts
