Setek WiFi Range Extender Not Connecting to AP: Resolved

You will get no internet on devices connected to the WiFi network of your Setek WiFi range extender if you are unable to create the extender and AP (access point) connection. The information given in this post will reveal how to fix the Setek WiFi range extender not connecting to AP issue. But, before that, we would like to shed light on the methods using which you can join your Setek range extender to the main access point.

How to Create Setek Extender and Access Point Connection?

There are two methods of connecting a Setek device to the main AP. The first method requires you to take the assistance of an RJ45 cable and link the LAN port of the main AP to the WAN (Internet) port of the extender with its help. On the other hand, the second method does not involve the usage of an Ethernet cable.

You can connect your Setek range extender and the host AP wirelessly with the help of WPS buttons present on both devices. You only have to press both buttons in a particular time frame. Just in case your WiFi AP lacks the physical WPS button, you can log in to it and enable to WPS option to connect it wirelessly to the range extender. However, you cannot opt for the WPS approach if your host access point is not WPS-capable.

We expect that you have now understood the science behind the extender and access point connection. Just in case this knowledge is proving of no help to you, it is recommended that you read the next section right away and learn why is your Setek WiFi range extender not connecting to AP.

Setek WiFi Range Extender Not Connecting to AP [Reasons]

• The distance between your Setek range extender and the main AP is too much (in the case of a wireless connection).
• You have used a damaged LAN cable to connect your WiFi devices.

• Technical glitches are not allowing your devices to get connected.

So, these are the topmost reasons why Setek extender might deny connecting to the access point. To fix the issue in a jiffy, you should move to the next section.

Fixed: Setek WiFi Range Extender Not Connecting to AP

You are required to give a shot at the techniques highlighted below if you cannot connect your Setek extender to the host Access point. Know that if you fail to resolve the issue using these tips, you should recall your knowledge of how to set up Setek WiFi extender properly. This is because you will need it after opting for the versatile hack of resetting the range extender in case every hack fails to help you.

• Ensure that your Setek range extender and the main WiFi AP are not placed in the two farthest rooms of your house. This is for your information that too much distance between devices can cause communication issues. Do not place them at a zero distance either.
• If you have connected your Setek WiFi range extender and the main access point with the help of an RJ45 cable, you need to understand that the cable should be free of damage. A damaged cable will only cause problems. Also, be sure that you have created a finger-tight connection.
• Restart your WiFi range extender to get rid of technical glitches. For this, you need to keep it unplugged for at least half an hour before connecting it to the main access point. If possible, you are suggested to power cycle or reboot the AP too.

Verdict

That’s all you can do to resolve the Setek WiFi range extender not connecting to the main AP issue. We are hopeful that you will be able to connect your devices after implementing the aforementioned hacks. Otherwise, the reset process is always there for your rescue. Remember to configure the extender once again after resetting it.

Just in case you are unable to connect your Setek WiFi extender to the access point during the setup process (wired connection), it is suggested that you use the correct WiFi password of the AP. It is required when you are asked to choose the network that you wish to extend.