Why does My Setek Extender Losing Internet Connection
There are many reason due to which the Setek extender losing internet connection. Many times some little technical issue is behind this problem. If you also facing this same, then you don’t need to get frustrate. You can resolve it easily by following the methods given below.
Solution to Resolve Setek Extender Losing Internet Connection
- Check Hardware Connection
- Relocate and Re-configure Extender
- Update Firmware
- Restart And Reset
Check Hardware Connection
- First of all check the extender getting proper power supply.
- Then see all the power and network cable are in good condition.
- Also check these cables are connected to their respective ports.
- If there is any lose connection or damaged, then fix it.
- Check the extender is properly connected to router and router to modem.
- Do power cycle on the entire network.
Check all these Hardware connection to ensure that all the physical connections are perfect. These can help to resolve the problem of Setek extender losing internet connection.
Relocate and Re-configure Extender
- Move the extender within the range of router.
- After that Re-configure the extender with router.
- If you have using Ethernet cable, then you don’t need to check there is no any damaged.
- And configure it via Web interface; you can access it by entering 192.168,10,1 into address bar.
- But if you are use wireless, then use the WPS button to configure the extender.
- Push the WPS button of the router and within two minutes press the button of the extender.
When you are using WPS method, then you don’t need to login to the web interface of the Setek extender. It inherits all the custom settings of the router.
Update Firmware
- Go to the web interface of the Setek extender by using the web browser.
- On interface, select the Advanced Settings in the Settings option.
- Then click on the Upgrading Firmware, and download and upload the latest firmware.
This way you can update the latest firmware of the extender. You can also perform Setek wifi extender setup and login on this interface.
Restart and Reset
Restart – Many times extender have facing some little technical issues. Here you just need to restart the extender. To restart simply, turn off the extender and plug power cable out. After few minutes give power to the extender again.
Reset – the most useful solution is reset the extender; it used for restore factory default settings of the extender. To reset, simply press and hold the reset button of the extender for 5-10 seconds. The reset process will start and take few minutes to complete.
Conclusion
In the above blog, you learned how to solve the problem of Setek extender losing internet connection with easy methods.
