Why is Setek Extender Connected But Internet Not Working?

The most possible reason why your Setek extender is connected but internet is not working is that it is getting no internet from the router. Therefore, check the Ethernet cable connection between your Setek extender and the main router. You need to ensure the following:

• The connection should be made with the help of a damage-free Ethernet cable.
• The cable must be connected to the LAN port of your router and the WAN port of your Setek extender.
• Your devices are should be connected firmly.

Fixed: Setek Extender Connected but Internet Not Working

There are some other fixes that you can try if your Setek extender is connected but the internet is not working:

1. Restart the Extender

You can give your Setek extender a restart to fix the internet problem. This is because sometimes it is just a glitch due to which the internet connection does not work. The steps to restart the range extender are mentioned below:

• Unplug the Setek extender from its respective power outlet.
• Wait for a few seconds.
• Plug your Setek extender back to its outlet.

2. Reduce the Extender and Router Distance

In case you have completed the Setek WiFi extender setup using the WPS method, there are chances that you’ve placed the extender too far from the router after the setup. Remember that both devices must be present in each other’s range to communicate properly. You can keep the extender and router at 8-10ft distance from each other. But, avoid placing them very close.

3. Relocate the Extender

A very small percentage of users are concerned about their WiFi extender placement. But, they don’t know that placing the Setek extender in a congested area or an area with WiFi interference can cause internet connection related problems.

So, you should change the location of your Setek extender and place it somewhere in a well-ventilated room. Make sure that you are keeping the extender far from the devices that emit electromagnetic waves and objects that contain a large amount of water.

4. Reset the Extender

Lastly, if the extender is still not getting connected to the internet, you can reset it to factory defaults and set it up from scratch. For your knowledge, resetting the extender will erase all the customized settings like WiFi name and password. The steps to reset the Setek extender are given below:

• Ensure that the Setek extender is receiving a non-fluctuating power supply.
• Look for the Reset button.
• Using a paper clip or a similar object, press the button.
• Hold the button for 7-10 seconds.
• Very soon, your extender will start working on the default settings.

The default settings of your extender are – IP address: 192.168.10.1, SSID – SETEK, WiFi password – no password, Login Password – password. Use these details for re-configuring your range extender. You can also use the WPS method to set up the extender.

The Final Thoughts

There is no one particular fix to the Setek extender connected but no internet problem. We’ve tried to mention every possible solution in this blog. Therefore, we hope that you will be able to resolve the problem.